Tools and accessories
5319
Stainless steel scraper		 5318
Grooved stainless steel scraper

For weld rod and general scraping
5316
Side cutters		 5317
Nozzle cleaning brush
5312
Drawing scraper		 5311
Deburrer with various blades
5101
Minispot light 24V/20 watt.
With detachable barrel fitting ring plus connector ring with 5m cable and special plug to match electrical mains connecting equipment.
For the DR 1000 and DR 1900 welding torch.		 5102
Minispot light 24V/20 watt.
With handle and mini switch. 5m cable and special plug to match electrical mains connecting equipment.
5320
Welding Torch Stand.
Made of stainless steel for torches DR 1000 and DR 1900.
5120
Mains Connecting Equipment.
Power point for either 230V or 120V welding torches, fault current protection switch, Fi-30 mA
Includes 24 volt protection socket, for Minispot.
2.5m mains cable, with plug as required.		 5130
Nitrogen/Air Mains Conecting Equipment.
Power point for either 230V or 120V welding torches, fault current protection switch, Fi-30 mA
Includes 24 volt protection socket, for Minispot.
3 way valve to switch from nitrogen to air, pressure reduction valve and air flow meter, with 10-100 NL/min scale, 2.5m mains cable, with plug as required.
5215
Transparent flow meter made of plexiglas.
10 - 100 NL/min scale, with 3/8" air connection nipple and hose connection.
 
 5210
Combination welding air regulator.
Pressure reduction valve with manometer, oil sperator, stop tap, flow meter with 10 - 100 NL/min scale, with 3/8" air connection nipple and hose connection.
5102
Welding mirror with table stand
Abrasion resistant non-stick teflon coating, precise heat distribution, chemical resistant against all materials, temp resistant up to 320 degree C.
Standard diameters 180mm, 220mm and 360mm
Special measurements and designs by request. 
Triacdive
 Triac S
Thermomess - GTH 1100

Digital thermometer for all measurements of air, surface and mass

 Thickness gauge

Fast measurement for tube walls, foils and plastic seal sheetings
Fusion cutter

For fast, effortless, precise, die-cutting of destructive test coupons (bones) from fusion or extrusion welded geomembrane seams.
Handy tension testing device

With the HANDY tension testing device, you can perform a precise and fast peel and tension test at site. The welding machines can thus be adjusted optimumly after a tension test has been performed
PLASWELD Ltd.
Cambridgeshire office:
1st Floor, 17 Sun Street, Isleham,
Ely, Cambridgeshire CB7 5RT
T +44 (0) 1638 781165
F +44 (0) 1638 781749
E enquiries@plasweld.org.uk
PLASWELD Ltd.
Teeside and Cleveland office/fabrication unit:
Unit B1, Greensquare,
Kirkleatham Business Park, Redcar TS10 5RS
T +44 (0) 1642 758002
F +44 (0) 1642 758007
E enquiries@plasweld.org.uk
Memberships and Affiliations
Corporate Member
Corporate Member
Plasweld Ltd. ©2008
Website design zfdesign.co.uk